Sequences
BNH.fdm.loop Continuously loop through mosaics until stopped.
CCK.flarewatch1600_uv A sequence for flare observations. With no EUV.
CCK.four_tops flexible multi-target sequence with up to five
CCK.scene.flexible Flexible multiwavelength scene.
CJS.EUV.WLtracking.1x1 at top1, 90 sec. cadence for WL, 45 sec. for 171 interleaved,
CJS.UVdynamics.1x1.EUVcontext Obtain a sequence of lyman alpha images at moderate cadence.
CJS.scene.CDSsynoptic Provide images at all wavelengths on central meridian
CJS.scene.caldiskcenter.1x1.all Provide images at all wavelengths and darks at disk center
CJW.wlflareresponse flare response for ,CJW.wlflarewatch no EUV allowed
CJW.wlflarewatch A sequence for white light flare observations. With no EUV.
COM.af1_front_al Front Aluminum filter integrity
HPW.flareresp flare response for HPW.flarewatch
HPW.flareresp1600_uv flare response for HPW.flarewatch1600_uv, no EUV allowed
HPW.flareresp195 flare response for HPW.flarewatch
HPW.flarewatch A sequence for flare observations.
HPW.flarewatch A sequence for flare observations.
HPW.flarewatch1600 A sequence for flare observations.
HPW.flarewatch1600_uv A sequence for flare observations. With no EUV.
HPW.flarewatch1600_uv A sequence for flare observations. With no EUV.
HPW.flarewatch195avg A sequence for flare observations.
RAS.all_images used as an intermediate to call RAS.uvfull and RAS.euvfull
RAS.brightest_ar.t1 a proto-type flare sequence
RAS.dynamics.1x1.all.1 the 30 day plan states that this will be 2 hours at
RAS.dynamics.1x1.all.2 movie tests, 30 minutes each at 5 wavelengths, try fore/back
RAS.dynamics.1x1.all.3 movie tests, 60 minutes each at 5 wavelengths, try fore/back
RAS.dynamics.1x1.all.4 similar to RAS.dynamics.1x1.all.3 but wavelengths interleaved
RAS.dynamics_2 a customizable sequence for smaller fov and fast cadence
RAS.dynamics_3 a customizable sequence for smaller fov and fast cadence
RAS.dynamics_4 a customizable sequence for smaller fov and fast cadence
RAS.euvfull uses general registers to take a set of EUV images
RAS.euvfullnolinger modified from RAS.euvfull, does not wait for radiation
RAS.fast171 just a bare bones seq
RAS.flare.sample1 a proto-type flare sequence
RAS.flare1.t1 a proto-type flare sequence
RAS.flare_response the response sequence for RAS.dynamics_4
RAS.limb.1x1.all a movie with wavelengths interleaved, first movie at the limb
RAS.movie.1x1.1EUV a test movie, we have 8 hours, keep it simple, just Fe XII 195
RAS.night_linger checks for night via the $HLZ flag, returns when flag is
RAS.radtest test radiation checker, run through SAA and HLZ
RAS.seq_flare.2 a proto-type flare sequence
RAS.test.imax.imin I max/I min test, revised and more complicated for
RAS.test.transient description: transient tests on the ground using WL
RAS.testcomp.long some packing and JPEG tests, intended to ferret out
RAS.testcomp.short some packing and JPEG tests, intended to ferret out
RAS.testing.FE1_euvonly take a big picture in each wavelength (5 here) and downlink
RAS.testing.FE1_sanseuv take a big picture in each wavelength (5 here) and downlink
RAS.testqs
RAS.testsnapshots.1x1.all description: take a big picture in each wavelength (8 here) and downlink
RAS.testsnapshots.a take a big picture in each wavelength (8 here) and downlink
RAS.testsnapshots.b does a 2 hour WL tracking test
RAS.testsnapshots.c takes UV/WL movies to fill 16 hours, re-target every 30 minutes
RAS.uvcenterlist uses general registers to take a set of UV images
RAS.uvfull uses general registers to take a set of UV images
RAS.wl.flaretest for ground testing of flare flag
STD.CCDsafe checks for CCD safety
STD.CCDsafe_init initializes counters for CCD safety
STD.CDSsynoptic Provide images at all wavelengths on central meridian
STD.CDSsynoptic171 Provide images at all wavelengths on central meridian
STD.CDSsynoptic_uv Provide images at all wavelengths on central meridian
STD.dynamics a customizable sequence, handles most single pointing observations
STD.dynamics3
STD.fast1600
STD.fast171
STD.fast195
STD.fast195v2
STD.fdm.bulletproof make a full-disk mosaic at selected wavelengths, based
STD.flare1600 flares in 1600, options for EUV response also
STD.flarewatch A sequence for flare observations. Modified from HPW.flarewatch
STD.forever195 A sequence for flare observations using only 195.
STD.radiation.EUV.check checks for radiation in first EUV frame that would be used
STD.responseEUV_for_flare1600 the EUV response sequence, phase one or two
STD.response_for_flare1600 the response sequence, phase one
TDT.any_frames TDT.any_frames.useq
TDT.dummy for making a load of frames only
TDT.dummy17 for making a load of frames only
TDT.dummy2 for making a load of frames only
TDT.trnotsofast Fast fluctuations in the transition region
Frames
cck.flareresp171 Fe IX; opt. JPEG; 3quarter CCD only; no binning; AEC-8; current ampl.; main buffer
cck.flareresp284 Fe XV; opt. JPEG; full CCD;2x2sum; AEC-8; current ampl.; main buffer
cck.stdaeccenterhalf171Q0
cck.stdaeccenterhalf195Q0 195 512x512 lossless
cck.stdaeccenterhalf284Q0 284 512x512 lossless
cck.stdaecfull171sum2 Fe XV; opt. JPEG; full CCD only; no binning; 2x2 summing; AEC; current ampl.; main buffer
cck.stdaecfull195sum2 Fe XV; opt. JPEG; full CCD only; no binning; 2x2 summing; AEC; current ampl.; main buffer
cjs.1600snapshot 1600 snapshot, 4x4 binned, compressed, primarily to avoid QS from getting stuck.
cjs.aecoffset4.full1216 Lyman alpha; opt JPEG; full CCD; full res; last AEC + 4; current ampl.; main buffer
cjs.aecoffset4.full1550 1550; opt JPEG; full CCD; full res; last AEC + 4; current ampl.; main buffer
cjs.aecoffset4.full1600 1600; opt JPEG; full CCD; full res; last AEC + 4; current ampl.; main buffer
cjs.aecoffset4.full1700 1700; opt JPEG; full CCD; full res; last AEC + 4; current ampl.; main buffer
cjs.aecoffset4.full171 Fe XII 195; opt JPEG; full CCD; full res; last AEC + 4; current ampl.; main buffer
cjs.aecoffset4.full195 Fe XII 195; opt JPEG; full CCD; full res; last AEC + 4; current ampl.; main buffer
cjs.aecoffset4.full284 Fe XV 284; opt JPEG; full CCD; full res; last AEC + 4; current ampl.; main buffer
cjs.aecoffset4.full284sum2 Fe XV 284; opt JPEG; full CCD 2x2sum; full res; last AEC + 4; current ampl.; main buffer
cjs.stdaec3quarter1216 Lyman alpha; opt. JPEG; 3quarter CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaec3quarter1550 CIV 1550; opt. JPEG; 3quarter CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaec3quarter1600 3/4 view fair quality 1600 images, AEC updates with flare and I max
cjs.stdaec3quarter1700 CIV 1700; opt. JPEG; 3quarter CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaec3quarter171 Fe IX; opt. JPEG; 3quarter CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaec3quarter171Q0 Fe IX; lossless JPEG; 3/4 CCD; no binning; AEC; current ampl.; main buffer
cjs.stdaec3quarter195 Fe XII; opt. JPEG; 3quarter CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaec3quarter195Q0 Fe X; lossless JPEG; 3/4 CCD; no binning; AEC; current ampl.; main buffer
cjs.stdaec3quarter284 Fe XV; opt. JPEG; 3quarter CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaec3quarter284Q0 Fe XV; lossless JPEG; 3/4 CCD; no binning (corrected 1999/07/12); AEC; curr.ampl.; mn bff
cjs.stdaec3quarter284sum2 Fe XV; opt. JPEG; 3quarter CCD only;2x2sum; AEC; current ampl.; main buffer
cjs.stdaeccenterhalf171 171; opt. JPEG; center half CCD; no binning; AEC; current ampl.; main buffer
cjs.stdaeccenterhalf195 195; opt. JPEG; center half CCD; no binning; AEC; current ampl.; main buffer
cjs.stdaecfull171 Fe IX; opt. JPEG; full CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaecfull171Q0 Fe IX; lossless JPEG; full CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaecfull195 Fe XII; opt. JPEG; full CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaecfull195Q0 Fe XII; lossless JPEG; full CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaecfull284Q0 Fe XV; lossless JPEG; full CCD only; no binning; AEC; current ampl.; main buffer
cjs.stdaecfull284sum2Q0 Fe XV; good JPEG; full CCD only; no binning; 2x2 summing; AEC; current ampl.; main buffer
cjs.stdaecfull284sum4Q0 Fe XV; good JPEG; full CCD only; no binning; 4x4 summing; AEC; current ampl.; main buffer
cjs.stdfull1216 Ly alpha; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
cjs.stdfull1550 1550; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
cjs.stdfull1600 1600; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
cjs.stdfull1700 1700; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
cjs.stdfull171 Fe IX 171; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
cjs.stdfull171Q0 Fe IX 171; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
cjs.stdfull195 Fe IX 195; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
cjs.stdfull195Q0 Fe IX 195; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
cjs.stdfull284 Fe IX 284; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
cjs.stdfull284sum2 Fe IX 284; opt. JPEG; full CCD only; 2x2 sum; default exp.; current ampl.; main buffer
cjs.stdfull284sum2Q0 Fe IX 284; opt. JPEG; full CCD only; 2x2 sum; default exp.; current ampl.; main buffer
cjs.stdfull_wl visible; opt. JPEG; full CCD only; no binning; default exp.; current ampl.; main buffer
hpw.flareresp_171 * 768x768 (1x1), 1024x1024 (8x8)
hpw.flareresp_171a * 768x768 (1x1), 1024x1024 (8x8)
hpw.flareresp_195 4/1/2001 - use I maxs
hpw.flareresp_284 4/1/2001 - use I max
hpw.full171aaQ0fixed60s
hpw.full171aoQ0fixed60s
hpw.full195aaQ0fixed60s
hpw.full195aoQ0fixed60s
hpw.full284aaQ0fixed60s
hpw.full284aoQ0fixed60s
jls.flare195.fov2 small fov for rapid cadence during a flare, uses AEC
jls.flare195.fov4 fixed exposure Fe XII 195 with full fov
jls.flarewhm195.t1 preflare context in Fe XII 195, uses main memory, full fov
jls.flarewhmcont.t1 preflare context in white light, uses main memory, full fov
jls.preflare195.t1 preflare in Fe XII 195, 4 arc min centered on last I max
jls.preflare195.t2 preflare in Fe XII 195, 4 arc min centered on last I max
jls.preflare195.t3 preflare in Fe XII 195, 4 arc min centered on last I max
junk pointing ref changed to I max
ras.1216.512.longexp Ly alpha; opt. JPEG; full CCD only; no binning;; current ampl.; main buffer
ras.1216.768.longexp Ly alpha; opt. JPEG; full CCD only; no binning; current ampl.; main buffer
ras.1216.fb.aec 1216 image, foreground/background with jpeg
ras.1216.fb.aecupdate 1216 image, foreground/background with jpeg
ras.1216.fb.aecupdate 1216 image, foreground/background with jpeg
ras.1216.full.aec 1216 image, standard full fov with jpeg
ras.1216.full.b2.aec 1216 image, binned 2x2, full fov, packed, not compressed
ras.1216.full.longexp Ly alpha; opt. JPEG; full CCD only; no binning; current ampl.; main buffer
ras.1216.j9.512.aec compressed to "fair" quality and small fov, test feasibility of this as a low telemetry
ras.1216.j9.512.aecm2 compressed to "fair" quality and small fov, test feasibility of this as a low telemetry
ras.1216.j9.512.daecm2 uses AEC default minus 2 for shorter exposure and better compression
ras.1216.j9.768.daecm2 uses AEC default minus 2 for shorter exposure and better compression
ras.1216.j9.full.daecm2 uses AEC default minus 2 for shorter exposure and better compression
ras.1216.tall.20s Ly alpha; opt. JPEG; tall CCD only; no binning; 20s exp.; current ampl.; main buffer
ras.1216.tall.longexp Ly alpha; opt. JPEG; tall CCD only; no binning; current ampl.; main buffer
ras.1216.wide.20s Ly alpha; opt. JPEG; wide CCD only; no binning; 20s exp.; current ampl.; main buffer
ras.1216.wide.longexp Ly alpha; opt. JPEG; wide CCD only; no binning; current ampl.; main buffer
ras.1550.fb.aec 1550 image, foreground/background with jpeg
ras.1550.fb.aecupdate 1550 image, foreground/background with jpeg
ras.1550.full.aec 1550 image, standard full fov with jpeg
ras.1550.full.b2.aec 1550 image, binned 2x2, full fov, packed, not compressed
ras.1550.j9.512.aec compressed to "fair" quality and small fov, test feasibility of this as a low telemetry
ras.1550.j9.512.aecm2 uses default AEC minus for shorter exposure and better compression
ras.1550.j9.512.daecm2 uses default AEC minus for shorter exposure and better compression
ras.1550.j9.768.daecm2 uses default AEC minus for shorter exposure and better compression
ras.1550.j9.full.daecm2 uses default AEC minus for shorter exposure and better compression
ras.1550.sum2.384.fixed
ras.1600.512.longexp 1600; opt. JPEG; 512; no binning; fixed AEC+18 exp.; current ampl.; main buffer
ras.1600.768.longexp 1600; opt. JPEG; 768; no binning; fixed AEC+18 exp.; current ampl.; main buffer
ras.1600.fb.aecupdate 1600 image, foreground/background with jpeg
ras.1600.fb.aecupdate 1600 image, foreground/background with jpeg
ras.1600.full.aec 1600 image, standard full fov with jpeg
ras.1600.full.longexp 1600; opt. JPEG; full CCD only; no binning; fixed AEC+18 exp.; current ampl.; main buffer
ras.1600.j9.512.aec compressed to "fair" quality and small fov, test feasibility of this as a low telemetry
ras.1600.j9.512.aecm2 compressed to "fair" quality and small fov, test feasibility of this as a low telemetry
ras.1600.j9.512.daecm2 uses default AEC minus for shorter exposure and better compression
ras.1600.j9.512.fixed 3/4 view fair quality 1600 images, AEC updates with flare and I max
ras.1600.j9.768.aec.sb 3/4 view fair quality 1600 images, AEC updates with flare and I max
ras.1600.j9.768.aec 3/4 view fair quality 1600 images, AEC updates with flare and I max
ras.1600.j9.768.daecm2 uses default AEC minus 2 for shorter exposure and better compression
ras.1600.j9.768.sb.aec 3/4 view fair quality 1600 images, AEC updates with flare and I max
ras.1600.j9.full.daecm2 uses default AEC minus 2 for shorter exposure and better compression
ras.1600.sum2.384.fixed modified from tdt.trfast1600rev.ufrm, fixed exposure
ras.1600.tall.10s 1600; opt. JPEG; tall; no binning; fixed 11.5s exp.; current ampl.; main buffer
ras.1600.tall.lonexp 1600; opt. JPEG; tall; no binning; fixed AEC+18 exp.; current ampl.; main buffer
ras.1600.tall.longexp 1600; opt. JPEG; tall; no binning; fixed AEC+18 exp.; current ampl.; main buffer
ras.1600.wide.10s 1600; opt. JPEG; wide; no binning; fixed 11.5s exp.; current ampl.; main buffer
ras.1600.wide.longexp 1600; opt. JPEG; wide; no binning; fixed AEC+18 exp.; current ampl.; main buffer
ras.1700.j6.384.14spart fixed exposure, this is a special long one
ras.1700.j6.512.14s fixed exposure, this is a special long one
ras.1700.j6.512.14spart fixed exposure, this is a special long one
ras.1700.j6.512.3spart fixed exposure
ras.1700.j6.512.aec.imax
ras.1700.j6.512.short.imax
ras.1700.j6.512 fixed exposure
ras.1700.j6.768.short.small
ras.1700.j6.768.short
ras.1700.j9.512.daecm2 uses default AEC minus for shorter exposure and better compression
ras.1700.j9.768.3s.small fixed exposure
ras.1700.j9.768.daecm2 uses default AEC minus for shorter exposure and better compression
ras.1700.j9.full.daecm2 uses default AEC minus for shorter exposure and better compression
ras.1700.sum2.384.fixed
ras.171.fb.aec 171 image, foreground/background with jpeg
ras.171.fb.aecupdate 171 image, foreground/background with jpeg
ras.171.fixed16s * 768x768 (1x1), 1024x1024 (8x8)
ras.171.fixed1s * 768x768 (1x1), 1024x1024 (8x8)
ras.171.fixed220s long fixed exposure 171
ras.171.fixed262s long fixed exposure 171
ras.171.full.aec 171 image, standard full fov with jpeg
ras.171.full.b2.aec 171 image, binned 2x2, full fov, packed, not compressed
ras.195.fb.aec 195 image, foreground/background with jpeg
ras.195.fb.aecupdate 195 image, foreground/background with jpeg
ras.195.fixed16s * 768x768 (1x1), 1024x1024 (8x8)
ras.195.fixed1s * 768x768 (1x1), 1024x1024 (8x8)
ras.195.fixed220s long fixed exposure 195
ras.195.fixed262s long fixed exposure 195
ras.195.full.aec 195 image, standard full fov with jpeg
ras.195.full.b2.aec 195 image, binned 2x2, full fov, packed, not compressed
ras.284.fb.aec 284 image, foreground/background with jpeg
ras.284.fb.aecupdate 284 image, foreground/background with jpeg
ras.284.fixed262s long fixed exposure 284
ras.284.full.aec 284 image, standard full fov with jpeg
ras.284.full.b2.aec 284 image, binned 2x2, full fov, packed, not compressed
ras.384.dark dark for 384 extraction
ras.aeccenter284 284 summed, center half only plus dosimeter
ras.aeccenter284s2 284 summed, center half only plus dosimeter
ras.aecfb171.sb 171 image, foreground/background with jpeg
ras.aecfb171 171 image, foreground/background with jpeg
ras.aecfb195.sb 195 image, foreground/background with jpeg
ras.aecfb195 195 image, foreground/background with jpeg
ras.aecfb284s2.sb 284 summed, center half plus background plus dosimeter
ras.aecfb284s2 284 summed, center half plus background plus dosimeter
ras.aecoffset0_171sum2.radck
ras.aecoffset0_171sum2sub.radck
ras.aecoffset0_195sum2.radck
ras.aecoffset0_195sum2 Fe XII; full CCD only; no binning; 2x2 summing; AEC+0; current ampl.; main buffer
ras.aecoffset0_195sum2sub.radck
ras.aecoffset2_171sum2 Fe IX; full CCD only; no binning; 2x2 summing; AEC; current ampl.; main buffer
ras.aecoffset2_195sum2 Fe XII; full CCD only; no binning; 2x2 summing; AEC; current ampl.; main buffer
ras.aecoffset2_512_171 Fe IX; Q=4; 3quarter CCD only; no binning; def. AEC+2, no update; current ampl.; main buffer
ras.aecoffset2_512_171Q0 Fe IX; Q=4; 3quarter CCD only; no binning; def. AEC+2, no update; current ampl.; main buffer
ras.aecoffset2_512_195 Fe IX; Q=4; 3quarter CCD only; no binning; def. AEC+2, no update; current ampl.; main buffer
ras.aecoffset2_512_195Q0 Fe IX; Q=4; 3quarter CCD only; no binning; def. AEC+2, no update; current ampl.; main buffer
ras.aecoffset2_768_171 Fe IX; Q=4; 3quarter CCD only; no binning; def. AEC+2, no update; current ampl.; main buffer
ras.aecoffset2_768_171Q0 Fe IX; Q=4; 3quarter CCD only; no binning; def. AEC+2, no update; current ampl.; main buffer
ras.aecoffset2_768_195 Fe IX; Q=4; 3quarter CCD only; no binning; def. AEC+2, no update; current ampl.; main buffer
ras.aecoffset2_768_195Q0 Fe IX; Q=4; 3quarter CCD only; no binning; def. AEC+2, no update; current ampl.; main buffer
ras.aecoffset4_171sum2 Fe IX; full CCD only; no binning; 2x2 summing; AEC+4; current ampl.; main buffer
ras.aecoffset4_195sum2 Fe XII; full CCD only; no binning; 2x2 summing; AEC+0; current ampl.; main buffer
ras.aecoffset4q0.full171 Fe IX 171; Q0; full CCD; full res; last AEC + 4; current ampl.; main buffer
ras.aecoffset4q0.full195 Fe XII 195; Q0; full CCD; full res; last AEC + 4; current ampl.; main buffer
ras.aecoffset6q0.full171 Fe IX 171; Q0; full CCD; full res; default AEC + 6; current ampl.; main buffer
ras.aecoffset6q0.full195 Fe XII 195; Q0; full CCD; full res; last AEC + 4; current ampl.; main buffer
ras.aecoffset6tall171 Fe IX; opt. JPEG; tall CCD only; no binning; fixed AEC+6; current ampl.; main buffer
ras.aecoffset6tall195 Fe XII; opt. JPEG; tall CCD only; no binning; fixed AEC+6; current ampl.; main buffer
ras.aecoffset6wide171 Fe IX; opt. JPEG; wide CCD only; no binning; fixed AEC+6; current ampl.; main buffer
ras.aecoffset6wide195 Fe XII; opt. JPEG; wide CCD only; no binning; fixed AEC+6; current ampl.; main buffer
ras.aecoffsetm3_768_284Q0sum2 Fe XV; opt. JPEG; 3quarter CCD only;2x2sum; AEC; current ampl.; main buffer
ras.aecoffsetm8_284sum2 284 Q4 2x2sum
ras.civ_flare.v1 small fov for rapid cadence during a flare, uses AEC
ras.fast171 fast 171 with partial readout, based on trfast series
ras.fast195 fast 195 with partial readout, based on trfast series
ras.fast284 fast 284 with partial readout, based on trfast series
ras.feix_flare.v1 small fov for rapid cadence during a flare, uses AEC
ras.fexii_flare.v1 small fov for rapid cadence during a flare, uses AEC
ras.fexv_flare.v1 small fov for rapid cadence during a flare, uses AEC
ras.fixed2s_284sum2 284 Q4 2x2sum
ras.flare195.fov2 small fov for rapid cadence during a flare, uses AEC
ras.flare195.fov4 fixed exposure Fe XII 195 with full fov
ras.flarecheck195
ras.flarecheck195sum8 modified to use binning since summing makes no sense and doesn't work,
ras.flareresp_1700.imax
ras.flareresp_1700
ras.flarewhm195.t1 preflare context in Fe XII 195, uses main memory, full fov
ras.flarewhmcont.t1 preflare context in white light, uses main memory, full fov
ras.from.cck.195_aect cck.195_aect
ras.full1216_30s Ly alpha; opt. JPEG; full CCD only; no binning; 32s exp.; current ampl.; main buffer
ras.full1216_40s Ly alpha; opt. JPEG; full CCD only; no binning; 32s exp.; current ampl.; main buffer
ras.full1600_10s 1600; opt. JPEG; full CCD only; no binning; fixed 5s exp.; current ampl.; main buffer
ras.hydrophobic171 171 image, for testing the "water"
ras.hydrophobic195 195 image, for testing the "water"
ras.hydrophobic284 284 image, for testing the "water"
ras.jpeg1216.abs1 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg1216.abs2 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg1216.abs3 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg1216.aec A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression.
ras.jpeg1216.aecm4 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression.
ras.jpeg1216.aecp4 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression.
ras.jpeg1550.abs1 A test snapshot for 1550. JPEG test.
ras.jpeg1550.abs2 A test snapshot for 1550. JPEG test.
ras.jpeg1550.abs3 A test snapshot for 1550. JPEG test.
ras.jpeg1550.aec A test snapshot for 1550. JPEG test. Uses default AEC.
ras.jpeg1550.aecm4 A test snapshot for 1550. JPEG test. Uses default AEC with -4 offset.
ras.jpeg1550.aecp4 A test snapshot for 1550. JPEG test. Uses default AEC with + 4 offset.
ras.jpeg1600.abs1 First JPEG test for 1600.
ras.jpeg1600.abs2 First JPEG test for 1600.
ras.jpeg1600.abs3 First JPEG test for 1600.
ras.jpeg1600.aec First JPEG test for 1600. Uses default AEC.
ras.jpeg1600.aecm4 First JPEG test for 1600. Uses default AEC with -4 offset.
ras.jpeg1600.aecp4 First JPEG test for 1600. Uses default AEC with + 4 offset.
ras.jpeg1600.test1.aec First JPEG test for 1600. Uses default AEC.
ras.jpeg1600.test2.aec First JPEG test for 1600. Uses default AEC.
ras.jpeg1600.test3.aec First JPEG test for 1600. Uses default AEC.
ras.jpeg1700.abs1 First JPEG test for 1700.
ras.jpeg1700.abs2 First JPEG test for 1700.
ras.jpeg1700.abs3 First JPEG test for 1700.
ras.jpeg1700.aec First JPEG test for 1700. Uses default AEC.
ras.jpeg1700.aecm4 First JPEG test for 1700. Uses default AEC with - 4 offset.
ras.jpeg1700.aecp4 First JPEG test for 1700. Uses default AEC with + 4 offset.
ras.jpeg171.abs1 A test snapshot for 171 Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg171.abs2 A test snapshot for 171 Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg171.abs3 A test snapshot for 171. Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg171.aec A test snapshot for 171. Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg171.aecm4 A test snapshot for 171. Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg171.test1.aec A test snapshot for 171.
ras.jpeg171.test2.aec A test snapshot for 171.
ras.jpeg171.test3.aec A test snapshot for 171.
ras.jpeg195.abs1 A test snapshot for 195 Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg195.abs2 A test snapshot for 195 Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg195.abs3 A test snapshot for 195 Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg195.aec A test snapshot for 195 Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg195.aecm4 A test snapshot for 195 Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg284.abs1 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg284.abs2 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg284.abs3 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg284.aec A test snapshot for 284 Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg284.aecm4 A test snapshot for 284 Full fov and a "nearly lossless" jpeg to check compression
ras.jpeg_wl.abs1 First JPEG test for wl.
ras.jpeg_wl.abs2 First JPEG test for wl.
ras.jpeg_wl.abs3 First JPEG test for wl.
ras.jpeg_wl.aec First JPEG test for wl. Use default AEC.
ras.jpeg_wl.aecm4 First JPEG test for wl. Use default AEC with -4 offset.
ras.jpeg_wl.aecp4 First JPEG test for wl. Use default AEC with + 4 offset.
ras.jpegspeedtest0 JPEG speed test 0. Does a short exposure and small area (256 from
ras.jpegtest0 The baseline for the compression tests. Just takes an exposure of the entire
ras.jpegtest1 Test 1, test 12/8 bit packing for the entire CCD. Output raw from full, the 12 bit
ras.jpegtest10 Test 10, JPEG test. Checks the medium quality entries in JPEG tables 2 and 3.
ras.jpegtest2 Test 2, test 12/8 bit packing for the central 256 subarea of the CCD. Output raw from
ras.jpegtest3 Test 3, JPEG test. Does 12 bit pack from full and JPEG table 0 from subarea 1. This
ras.jpegtest4 Test 4, JPEG test. Does 12 bit pack from full and JPEG table 0 from subarea 1 and
ras.jpegtest5 Test 5, JPEG test. Covers a few more of the JPEG tables. Just the central 256
ras.jpegtest6 Test 6, JPEG test. Covers a few more of the JPEG tables. Just the central 256
ras.jpegtest7 Test 7, JPEG test. Covers a few more of the JPEG tables. Just the central 256
ras.jpegtest8 Test 8, JPEG test. Checks the Huffman tables, does same JPEG tables with
ras.jpegtest9 Test 9, JPEG test. Checks the Huffman tables, does same JPEG tables with
ras.lya_flare.v1 small fov for rapid cadence during a flare, uses AEC
ras.movie195.t1 195 movie with full fov with high compression and a 256x256 area centered
ras.movie195.t2 195 movie with full fov with high compression and a 512x512 area centered
ras.notransient.nopack.test1 test transiets
ras.notransient.test1 test transiets
ras.notsofast171 fast 171 with partial readout, based on trfast series
ras.preflare195.t1 preflare in Fe XII 195, 4 arc min centered on last I max
ras.preflare195.t2 preflare in Fe XII 195, 4 arc min centered on last I max
ras.preflare195.t3 preflare in Fe XII 195, 4 arc min centered on last I max
ras.setup195.t1 setup for a movie in 195, do Imax and Imin (check if both are correct)
ras.stdaec3quarter284 Fe XV; opt. JPEG; wide CCD only; no binning; AEC; current ampl.; main buffer
ras.stdaectall171 Fe IX; opt. JPEG; tall CCD only; no binning; AEC; current ampl.; main buffer
ras.stdaectall195 Fe XII; opt. JPEG; tall CCD only; no binning; AEC; current ampl.; main buffer
ras.stdaecwide171 Fe IX; opt. JPEG; wide CCD only; no binning; AEC; current ampl.; main buffer
ras.stdaecwide195 Fe XII; opt. JPEG; wide CCD only; no binning; AEC; current ampl.; main buffer
ras.test.imax.imin.1 Test I max and I min. Use 8x8 binning in subarea 1. Revised 11/24/97. Now uses
ras.test.imax.imin.2 Test I max and I min. Use 4x4 binning in subarea 1. Revised 11/24/97. This is
ras.test.imax.imin.3 Test I max and I min. Use 1x1 binning in subarea 1. Revised 11/24/97. This is
ras.test.imax.imin.4 Test I max and I min. This one uses camera summing as an additional test.
ras.test.wl.at.imaxandimin Test I max and I min. This is the response part. Does an image at the I max and
ras.testshot1216.512 A test snapshot for 1216. This is used in the first movie. It uses the default AEC.
ras.testshot1216.abs1 A test snapshot for 1216.
ras.testshot1216.abs2 A test snapshot for 1216.
ras.testshot1216.abs3 A test snapshot for 1216.
ras.testshot1216.aec A test snapshot for 1216. This is used in the first movie. It uses the default AEC.
ras.testshot1216.t1 A test snapshot for 1216. Full fov and a "good" quality JPEG to evaluate.
ras.testshot1550.512 A test snapshot for 1550. This is used in the first movie. It uses the default AEC.
ras.testshot1550.abs1 A test snapshot for 1550.
ras.testshot1550.abs2 A test snapshot for 1550.
ras.testshot1550.abs3 A test snapshot for 1550.
ras.testshot1550.aec A test snapshot for 1550. This is used in the first movie. It uses the default AEC.
ras.testshot1550.t1 A test snapshot for 1550. Full fov and a "good" quality JPEG to evaluate.
ras.testshot1600.abs1 A test snapshot for 1600 light.
ras.testshot1600.abs2 A test snapshot for 1600 light.
ras.testshot1600.abs3 A test snapshot for 1600 light.
ras.testshot1600.aec A test snapshot for 1550 but using the 1600 filter for more light. This is used in
ras.testshot1600.t1 A test snapshot for 1600. Full fov and a "good" quality JPEG to evaluate.
ras.testshot1700.abs1 A test snapshot for 1700.
ras.testshot1700.abs2 A test snapshot for 1700.
ras.testshot1700.abs3 A test snapshot for 1700.
ras.testshot1700.t1 A test snapshot for 1700. Full fov and a "good" quality JPEG to evaluate.
ras.testshot171.abs1 A test snapshot for 171. Full fov and no compression.
ras.testshot171.abs2 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot171.abs3 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot171.t1 A test snapshot for 171. Full fov and a "good" quality JPEG to evaluate.
ras.testshot195.abs1 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot195.abs2 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot195.abs3 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot195.t1 A test snapshot for 195. Full fov and a "good" quality JPEG to evaluate.
ras.testshot284.abs1 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot284.abs2 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot284.abs3 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot284.t1 A test snapshot for 284. Full fov and a "good" quality JPEG to evaluate.
ras.testshot_wl.512 A test snapshot for white light. For the first movie. No compression. Default AEC.
ras.testshot_wl.abs1 A test snapshot for 1216.
ras.testshot_wl.abs2 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot_wl.abs3 A test snapshot for 1216. Full fov and a "nearly lossless" jpeg to check compression
ras.testshot_wl.aec A test snapshot for white light. Default AEC. Uses high quality compression.
ras.testshot_wl.t1 A test snapshot for white light. Full fov and a "nearly lossless" jpeg to check compression.
ras.transient.nopack.test1 test transiets
ras.transient.test1 Test transients on the ground with WL. This should not response until lamp
ras.transient.test2 Test transients on the ground with WL. This should not response until lamp
ras.trfast.at.imax based on Ted's tdt.trfast1600AEC but centered on I max and with short (-8)
ras.trfast1550fixed modified from tdt.trfast1550rev, with fixed exp
ras.trfast1600fixed modified from tdt.trfast1600rev.ufrm, fixed exposure
ras.trfast1600small based on Ted's tdt.trfast1600AEC but centered on I max and with short (-8)
ras.trfast1700fixed modified from tdt.trfast1700rev.ufrm, fixed exposure
ras.wl.fb.aec white light, foreground/background at center
ras.wl.full.aec white light, standard full fov, JPEG compressed, no AEC update and use default
ras.wl.fulljpeg.aec white light, full fov with "good" compression, uses AEC default, no update
ras.wl.j0.full.16ms
ras.wl.j0.wide.16ms
ras.wl.j4.512.2ms.imax
ras.wl.j4.full.16ms
ras.wl.j4.full.8ms
ras.wl.j6.384.4mspart fixed 4 ms exposure, lower counts for better compression
ras.wl.j6.512.2ms.imax
ras.wl.j6.512.2ms fixed 2 ms exposure
ras.wl.j6.512.4ms fixed 4 ms exposure, lower counts for better compression
ras.wl.j6.512.aec.imax
ras.wl.j6.512.aec compressed to "good" quality and small fov, test feasibility of this as a low telemetry
ras.wl.j6.768.4ms.small fixed 4 ms exposure, lower counts for better compression
ras.wl.j6.768.4ms fixed 4 ms exposure, lower counts for better compression
ras.wl.j6.full.4ms fixed 4 ms exposure, lower counts for better compression
ras.wl.p12.full.16ms
ras.wl.preflare.t1 wl flare test, for ground tests only
ras.wl.preflare.t2 wl flare test, for ground tests only
ras.wl.tracktest.512 test tracking with JPEG by doing a "lossless" and a lossy on the same image
ras.wl.venus1
ras.wl.venus2
ras.wl.venus3
ras.wl.venus4 //checkin: 04/19/104 1230 File ras.wl.venus4.ufrm ID: 0x2450 Version: 0 Checked in.
ras.wl.venus5
std.dark0.1x1.171 Dark; near-lossless comp.; full CCD only; 1x1; 20 ms exp.; current ampl.; main buff.
std.dark20.1x1.171 Dark; near-lossless comp.; full CCD only; 1x1; 19.48 s exp.; current ampl.; main buff.
std.dark65.1x1 Dark; near-lossless comp.; full CCD only; 1x1; 65.536 s exp.; current ampl.; main buff.
std.radcheck1600 radiation tester for 1600, doesn't change wavelength
std.radcheck171.touchy radiation tester for 171 intended to be used prior to a normal 171 image
std.radcheck171 radiation tester for 171 intended to be used prior to a normal 171 image
std.radcheck195.touchy radiation tester for 195 intended to be used prior to a normal 195 image
std.radcheck195 0x0000
std.radcheck284.touchy radiation tester for 284, intended to be used prior to a normal 284 image
std.radcheck284 radiation tester for 284, intended to be used prior to a normal 284 image
tdt.karin1600 Chromosphere hi cadence, 1600, exp = fixed, 256 x 256, uncompressed, bottom of CCD !!!
tdt.karindark Chromosphere hi cadence, dark, exp = fixed, 256 x 256, uncompressed, bottom of CCD !!!
tdt.trfast1550 TR rapid fluctuations, 1550, exp = 6., 640 x 256, JPEG 2,1,2