Sequences

STD.13pos_pzt_ff                        Make flat field map by using 13 PZT offsets 
STD.CCDsafe                              checks for CCD safety 
STD.CCDsafe_init                         initializes counters for CCD safety 
STD.ISS_close_loop                       Close ISS loop
STD.ISS_open_loop                        Open ISS loop
STD.amplifierA                            initialize the default amplifier to A
STD.amplifierB                            initialize the default amplifier to B
STD.dark_set                            Provide dark images at summings 1x1, 2x2 and 4x4
STD.flats_1700                          Make flat field map by using PZT offsets for 1700
STD.flats_171                           Make flat field map by using PZT offsets for 171
STD.flats_195                           Make flat field map by using PZT offsets for 195
STD.flats_284                           Make flat field map by using PZT offsets for 284
STD.flats_wl                            Make flat field map by using PZT offsets for WL
STD.focus_euv                            Focus tests at 171, 195, 284 at optimal default exposure
STD.focus_lyman                          Focus tests at lyman alpha at optimal default exposure
STD.focus_wluv                           Focus tests at wl and C IV triplet at optimal default exposure
STD.ptg_cal                              take a WL movie at target top1:  strip images for roll
STD.repoint_top1                         Point to target-of-opportunity 1
STD.repoint_top2                         Point to target-of-opportunity 2
STD.repoint_top3                         Point to target-of-opportunity 3
STD.repoint_top4                         Point to target-of-opportunity 4
STD.reset_regs                          Reset Event flag registers.
STD.selecttarget                         Select a target prescribed by global register $g0
STD.subpixel                            Make subpixel imaging set using 4 PZT offsets 

Frames

std.amplifierA                          Frame to switch to amplifier A; no exposure, no mechanisms move, no data.
std.amplifierB                          Frame to switch to amplifier B; no exposure, no mechanisms move, no data.
std.dark0.1x1                           Dark; near-lossless comp.; full CCD only; 1x1;  20 ms exp.; current ampl.; main buff.
std.dark0.2x2                           Dark; near-lossless comp.; full CCD only; 2x2;  20 ms exp.; current ampl.; main buff.
std.dark0.4x4                           Dark; near-lossless comp.; full CCD only; 4x4;  20 ms exp.; current ampl.; main buff.
std.dark0.8x8                           Dark; near-lossless comp.; full CCD only; 8x8;  20 ms exp.; current ampl.; main buff.
std.dark1.1x1                           Dark; near-lossless comp.; full CCD only; 1x1;  1.024 s exp.; current ampl.; main buff.
std.dark1.2x2                           Dark; near-lossless comp.; full CCD only; 2x2;  1.024 s exp.; current ampl.; main buff.
std.dark1.4x4                           Dark; near-lossless comp.; full CCD only; 4x4;  1.024 s exp.; current ampl.; main buff.
std.dark1.8x8                           Dark; near-lossless comp.; full CCD only; 8x8;  1.024 s exp.; current ampl.; main buff.
std.dark20.1x1                          Dark; near-lossless comp.; full CCD only; 1x1;  19.48 s exp.; current ampl.; main buff.
std.dark20.2x2                          Dark; near-lossless comp.; full CCD only; 2x2;  19.48 s exp.; current ampl.; main buff.
std.dark20.4x4                          Dark; near-lossless comp.; full CCD only; 4x4;  19.48 s exp.; current ampl.; main buff.
std.dark20.8x8                          Dark; near-lossless comp.; full CCD only; 8x8;  19.48 s exp.; current ampl.; main buff.
std.dark_flush                          Throw-away frame to flush CCD and/or reset focus & PZT offset