CCK.aec1 AEC test at wl, 1600, 1550, 195 CCK.arflareresp.1x1.195 Respond to CCK.arflarewatch.1x1.195 CCK.arflareresp.1x1.195_171 Alternative response to CCK.arflarewatch.1x1.195 CCK.arflareresp.1x1.CIV Respond to CCK.arflarewatch.1x1.CIV CCK.arflareresp.1x1.all.1 Respond to CCK.arflarewatch.1x1.all.1 CCK.arflareresp.1x1.all.2 Respond to CCK.arflarewatch.1x1.all.1 CCK.arflarewatch.1x1.195 Test the flare check algorithm with response sequence. CCK.arflarewatch.1x1.CIV Test the flare check algorithm with response sequence. CCK.arflarewatch.1x1.all.1 Test the flare check algorithm with response sequence. CCK.arflarewatch.1x1.all.2 Test the flare check algorithm with response sequence. CCK.eastlimb.2x1.all EUV limb study CCK.eastlimb.3x2.Fe12Fe15 EUV limb study CCK.logic1 sequence logic test CCK.logic2 sequence logic test CCK.logic3 sequence logic test CCK.logic4 sequence logic test CCK.logic5 sequence logic test CCK.northpolar.1x1.171 polar study, high cadence CCK.northpolar.1x1.all polar study, 7.5 min. cadence CCK.northpolar.3x1.1wave Fe XII plume morphology study CCK.northpolar.east.multi polar plumes study CCK.northpolar.fan.multi polar plumes study CCK.northpolar.west.multi polar plumes study CCK.southpolar.1x1.171 polar study, high cadence CCK.southpolar.1x1.all polar study, 7.5 min. cadence CCK.southpolar.3x1.1wave Fe XII plume morphology study CCK.southpolar.east.multi polar plumes study CCK.southpolar.fan.multi polar plumes study CCK.southpolar.west.multi polar plumes study CCK.westlimb.2x1.all EUV limb study CCK.westlimb.3x2.Fe12Fe15 EUV limb study CJS.armosaic.7panel.all.1 AR1 (E)UV of central field, EUV mosaic at 195 with 2x2 binning. CJS.crosscaldiskcenter.1x1.all Provide images at all wavelengths at disk center, low cadence. CJS.deepquietsun.1x1.nowl Take a range of exposures around optimal AEC in quiet Sun CJS.dynamics.1x1.lymancontext Obtain a sequence of lyman alpha images at moderate cadence. CJS.failsafe.mdicenter EUV+UV at MDI fov, low cadence, high compression. CJS.failsafe.norepoint EUV+UV at current pointing, low cadence, high compression CJS.fastdynamics.1x1.CIVcontext Obtain a sequence of C IV images (512x512) at highest cadence. CJS.priocaldiskcenter.1x1.all EUV+UV+darks at diskcenter, full res., no compr.,small buffer CJS.qrflarewatch.1x1.euv.1 Test the flare check algorithm and Quiet Sun variability CJS.qrmosaic.7panel.all.1 at QR1, UV single panel + mosaic 7 panels at 195A 2x2 binned CJS.qschinterface.1x1.all1 at top1, 90 sec. cadence for WL +1550+171+195 interleaved CJS.scene.CDSsynoptic Provide images at all wavelengths on central meridian CJS.scene.ar1.allnoWL at ar1, take standard pictures at all wavel. but white light. CJS.scene.caldiskcenter.1x1.all Provide images at all wavelengths and darks at disk center CJS.scene.equator.6x1.all northern act. belt of a full-disk mosaic at all wavelengths CJS.scene.fulldisk.allpanel.1wave make a full-disk mosaic at only one wavelength (Lyman alpha) CJS.scene.fulldisk.allpanel.all make a full-disk mosaic at all wavelengths CJS.scene.northbelt.5x1.all northern act. belt of a full-disk mosaic at all wavelengths CJS.scene.northswath.4x1.all northernmost swath of a full-disk mosaic at all wavelengths CJS.scene.priofulldisk.allpanel.1wave make a full-disk mosaic at only one wavelength (195A) CJS.scene.priofulldisk.allpanel.all make a full-disk mosaic at all wavelengths, at high priority CJS.scene.qr1.allnoWL at qr1, take standard pictures at all wavelengths except WL CJS.scene.southbelt.5x1.all northern act. belt of a full-disk mosaic at all wavelengths CJS.scene.southswath.4x1.all northernmost swath of a full-disk mosaic at all wavelengths CJS.slowdynamics.1x1.CIVcontext Obtain a sequence of C IV images at moderate cadence. CJS.tracking.1x1.171 at top1, 90 sec. cadence for WL, 45 sec. for 171 interleaved CJS.tracking.1x1.all1 at top1, 90 sec. cadence for white light, + UV+EUV interleaved CJS.tracking.1x1.all2 at top1, 90 sec. cadence for WL, plus UV+EUV interleaved, + FDM CJS.tracking.1x1.all3 at top1, 90 sec. cadence for WL, + UV and EUV interleaved CJS.tracking.1x1.all4 at top1, 90 sec. cadence for WL, + UV and EUV interleaved CJW.ccd4_ice For cosmetics including possible "ice" CJW.darks_full_ccd Dark current and noise via set of hard and soft dark frames COM.acs3_offset_EW First Offset Pointing Test, EW Direction COM.acs3_offset_NS First Offset Pointing Test, NS Direction COM.aec1_euv AEC test at wl, 1600, 1550, 195 COM.aec2_euv AEC test at 195 COM.aec2_wluv AEC test at wl, 1600, 1550, 1216 COM.aec_wluv AEC test at white light. Intended for use with lamp. COM.af1_front_al Front Aluminum filter integrity COM.af2_back_al Back Aluminum filter integrity COM.cjs_misctests Sequence to test some software options not routinely used COM.cjs_misctests2 Subsequence to test some software options not routinely used COM.dark_movie take movie dark frames, based on COM.ts1_1st_movie COM.dc1_compress_dark some packing and JPEG tests, intended to ferret out COM.dc1_compress_euv initial compression tests for EUV wavelengths COM.dc1_compress_euv2 more compression tests for EUV wavelengths, just 171 with COM.dc1_compress_uv initial compression tests for uv only COM.dc1_compress_uv2 another compression test for uv only, more levels of COM.dc1_compress_wl initial compression tests for wl only COM.dc1_compress_wluv initial compression tests for wl and uv only COM.fe1_focus_euv Focus tests at 171, 195, 284 using different exposures COM.fe1_focus_uv Focus tests in UV CIV triplet and 1216 at set of exposures COM.fe1_focus_wl Focus tests in white light only using different exposures COM.ff1_flats_euv Make flat field map by using PZT offsets for EUV COM.ff1_flats_wluv Make flat field map by using PZT offsets for WL/UV COM.gti0_diodes Diode Intensity Check COM.gti1_gt_cal Measure displacement of image for given error signal. COM.gti3_pzt_offset Calibrate PZT offsets COM.gti4_pzt_gain Measure displacement of image for given PZT signal. COM.gti6_4limb Four-limb alignment test COM.roll_cal take a sunspot movie at the limb, target top1 COM.subpixel_wluv Test sub_pixel imaging by using PZT offsets for WL/UV COM.ts1_1st_movie take a first movie in a few wavelengths, may be revised DC.filament.1x1.HI Observe a filament or channel at high cadence DC.filament.2x2.all Observe a filament or channel in EUV and Lyman alpha DC.filament.mix.all1 Observe a filament, 1x1 with 2x2 interleaved. DPM.CCDProt_dis Setup parameters for CCD safety checks. DPM.UTL_ExecList DPM.UTL_ProcFrm DPM.UTL_procfrm DPM.fast_mosaic Do Full Disk Mosaic with no delays DPM.flare_check Call a sequence to check for flare. DPM.flare_check_init Initialize flare check parameters for STD.flare_check. DPM.flare_chk1 Call a sequence to check for flare. DPM.gti1_gt_cal Measure displacement of image for given error signal. DPM.gti4_pzt_gain Measure displacement of image for given PZT signal. DPM.ift_Fill_SmallBuf1 To fill Small buffer # 1. DPM.ift_Fill_SmallBuf2 To fill Small buffer # 1. DPM.ift_Fill_SmallBuf3 To fill Small buffer # 3. DPM.ift_Fill_SmallBuf4 To fill Small buffer # 1. DPM.ift_aec_test Outputs image data and it's histogram DPM.ift_cmmodes Sequence of images in all camera modes DPM.ift_fast Run a sequence to time average data DPM.ift_focus Test Focus offsets. DPM.ift_focus_series Focus series. DPM.ift_hist Outputs image data and it's histogram DPM.ift_hist_test Outputs image data and it's histogram DPM.ift_mosaic Do Full Disk Mosaic with no delays DPM.ift_mosaic_1 Do Full Disk Mosaic DPM.ift_pics Takes dark frames until stopped DPM.ift_sbfill To fill Small buffer. DPM.ift_sblock_test To test small buffer locking process. DPM.ift_short_focus_series Short Focus series. DPM.ift_speed1024 To take full frame pictures as fast as possible. DPM.ift_speed1024j To take full frame pictures as fast as possible. DPM.ift_speed1024s To take full frame pictures as fast as possible. DPM.ift_speed64 To take pictures as fast as possible. DPM.ift_speed64_delay To take 64x64 images with 1 tick delay. DPM.ift_timavg Run a sequence to time average data DPM.ift_transchk Run a sequence to time average data DPM.ift_wlscan Scan the entire wavelength table. DPM.iss_disp_errs Measure displacement of image for given error signal. DPM.junk Measure displacement of image for given PZT signal. DPM.mosaic_30s Do Full Disk Mosaic DPM.mosaic_30s_delay Do Full Disk Mosaic DPM.qs_test16 Move QS to every position from every position. DPM.safety_chk Checks CCD safety code. DPM.safety_prm Setup parameters for CCD safety checks. DPM.sbfill_test To fill Small buffer. DPM.scene DPM.speed64_hp To take pictures as fast as possible. DPM.sqt_addrchk Sequence of images in all camera modes DPM.sqt_amptest Takes frames using both amplifiers DPM.sqt_chk64x128 To take pictures as fast as possible. DPM.sqt_execlist Scan the entire wavelength table. DPM.sqt_extst Sequence of images with different offsets DPM.sqt_flrchk_test Test flare check sequences DPM.sqt_jpgtst To take pictures as fast as possible and JPG compress them. DPM.sqt_misctest Sequence to test some software options not routinely used DPM.sqt_pics3 Downlinks 3 full frame areas per frame DPM.sqt_small_pics To take 64x64 pictures continuously. DPM.sqt_speed64_dark To take dark pictures as fast as possible. DPM.sw1_dhc_fncal Outputs image data and it's histogram DPM.sw3_table_dump Dumps DHC Page3 (COntains all tables) DPM.test.imax.imin a simple I max/I min test DPM.transient_test_wl Test of the transient flag, using high and low thresholds DPM.util_ExecList A sequence to loop through a set of targets and frames DPM.util_ProcFrm To loop through all frames specified in R106-R113 DPM.vis_ltc Linearity, offset, and "gain" for full CCD in visible light MDM.qs_test32 Move QS to every position from every position and then MDM.qs_test4 Move QS to position B B C C B B ... for 100 frames MDM.test_mosaic64dark Exercise the wedge motors by running "mosaic" up MDM.test_pzt_ff1 Do flat field images using PZT offsets MDM.test_soft_dark To take soft dark frames. RAS.brightest_ar.t1 a proto-type flare sequence RAS.dynamics.1x1.all.1 the 30 day plan states that this will be 2 hours at RAS.dynamics.1x1.all.2 movie tests, 30 minutes each at 5 wavelengths, try fore/back RAS.dynamics.1x1.all.3 movie tests, 60 minutes each at 5 wavelengths, try fore/back RAS.dynamics.1x1.all.4 similar to RAS.dynamics.1x1.all.3 but wavelengths interleaved RAS.flare.sample1 a proto-type flare sequence RAS.flare1.t1 a proto-type flare sequence RAS.limb.1x1.all a movie with wavelengths interleaved, first movie at the limb RAS.movie.1x1.1EUV a test movie, we have 8 hours, keep it simple, just Fe XII 195 RAS.seq_flare.2 a proto-type flare sequence RAS.test.imax.imin I max/I min test, revised and more complicated for RAS.test.transient description: transient tests on the ground using WL RAS.testcomp.long some packing and JPEG tests, intended to ferret out RAS.testcomp.short some packing and JPEG tests, intended to ferret out RAS.testing.FE1_euvonly take a big picture in each wavelength (5 here) and downlink RAS.testing.FE1_sanseuv take a big picture in each wavelength (5 here) and downlink RAS.testsnapshots.1x1.all description: take a big picture in each wavelength (8 here) and downlink RAS.testsnapshots.a take a big picture in each wavelength (8 here) and downlink RAS.testsnapshots.b does a 2 hour WL tracking test RAS.testsnapshots.c takes UV/WL movies to fill 16 hours, re-target every 30 minutes RAS.wl.flaretest for ground testing of flare flag STD.13pos_pzt_ff Make flat field map by using 13 PZT offsets STD.CCDsafe checks for CCD safety STD.CCDsafe_init initializes counters for CCD safety STD.ISS_close_loop Close ISS loop STD.ISS_open_loop Open ISS loop STD.amplifierA initialize the default amplifier to A STD.amplifierB initialize the default amplifier to B STD.dark_set Provide dark images at summings 1x1, 2x2 and 4x4 STD.flats_1700 Make flat field map by using PZT offsets for 1700 STD.flats_171 Make flat field map by using PZT offsets for 171 STD.flats_195 Make flat field map by using PZT offsets for 195 STD.flats_284 Make flat field map by using PZT offsets for 284 STD.focus_euv Focus tests at 171, 195, 284 at optimal default exposure STD.focus_lyman Focus tests at lyman alpha at optimal default exposure STD.focus_wluv Focus tests at wl and C IV triplet at optimal default exposure STD.repoint_top1 Point to target-of-opportunity 1 STD.repoint_top2 Point to target-of-opportunity 2 STD.repoint_top3 Point to target-of-opportunity 3 STD.reset_regs Reset Event flag registers. STD.subpixel Make subpixel imaging set using 4 PZT offsets TDT.trfast Fast fluctuations in the transition region TDT.uv_subpixel movie for subpixel resolution in 1700 & 1600 cmmodes doframe exec_list junk