# FILE:
#	logic_series1.tim
# PURPOSE:
#	TRACE Test Pattern Plan File
#	Total runtime: approximately 15 minutes.
# HISTORY:
#	Created:	11-march-96 by C. Kankelborg
#	12-Mar-97 (MDM) - Modified the layout slightly

# --- "LOGIC1 Time Mark"
ABS     04:00:00        CMD  icsqreg (reg=$saa,val=1)   #set SAA
REL    +00:00:01        Start CCK.logic1 prio=0        #(t1)
REL    +00:00:15        CMD  icsqreg (reg=$saa,val=0)   #clear SAA (t11)
REL    +00:00:30        CMD  icsqreg (reg=$saa,val=1)   #set SAA (t12)
REL    +00:00:30        CMD  icsqreg (reg=$fef,val=1)   #set FEF (t13)
REL    +00:00:30        CMD  icsqreg (reg=$saa,val=0)   #clear SAA (t14)
REL    +00:00:30        CMD  icsqreg (reg=$sef,val=1)   #set SEF (t15)
REL    +00:00:30        CMD  icsqreg (reg=$fef,val=0)   #clear FEF (t16)
REL    +00:00:30        CMD  icsqreg (reg=$sef,val=0)   #clear SEF (t17)
REL    +00:00:30        Start CCK.logic2 prio=0        #(t2)

# --- "LOGIC2 Time Mark"
REL    +00:00:15        Start CCK.logic2 prio=1        #(t3)
REL    PREV_DONE        Start CCK.logic4         
REL    +00:01:30        CMD  icsqreg (reg=$fef,val=1)   #set FEF (t31)
REL    +00:01:00        CMD  icsqreg (reg=$tef,val=1)   #set TEF (t32)
REL    +00:01:00        CMD  icsqreg (reg=$sef,val=1)   #set SEF (t33)

# --- "LOGIC5 Time Mark"
REL    +00:01:00        Start CCK.logic5 prio=0        #(t4)

# CCK.logic5 should terminate after taking 33 * 4 very short exposures.
# It may be interrupted early if desired.