# FILE:
#       tv_trans1.tim
# PURPOSE:
#       TRACE Operations Simulation Plan File for
#	first temperature transition
# HISTORY:
#       Created 23-Jul-97 by M.Morrison
#	11-Aug-97 (MDM) - Various modifications
#	16-Aug-97 (MDM) - Optimization and some additions
#	27-Aug-97 (TDT) - Major descope, use only flight-tested sequences
#
# COMMENTS:
#	No absolute date/time specified in this file since the
#	date/time of the start of the transition is not known
#	until 2-4 hours before it happens.
#
#	Run Time = about 7 hrs 
#
REL	+00:00:00	Start STD.reset_regs
REL	PREV_DONE	Start DPM.ift_mosaic
REL	PREV_DONE	Start DPM.ift_wlscan
REL	PREV_DONE	Start DPM.ift_cmmodes
REL	PREV_DONE	Start DPM.ift_timavg
REL	PREV_DONE	Start DPM.sqt_extst

REL	+01:00:00	Downlink		#

REL	+00:10:00	Start STD.reset_regs
REL	PREV_DONE	Start DPM.ift_speed1024
REL	+00:05:00	Start DPM.ift_speed1024j            
REL	+00:05:00	Stop

REL	+00:01:00	Start STD.reset_regs
REL     +00:01:00       Start CCK.logic2 prio=0         #(t2)
REL     +00:00:30       Start CCK.logic2 prio=1         #(t3)
REL     +00:01:00       CMD  icsqreg (reg=$fef,val=1)   #set FEF (t31)
REL     +00:15:00       CMD  icsqreg (reg=$tef,val=1)   #set TEF (t32)
REL	+00:02:00	Stop
REL	+00:01:00	Downlink		#  

REL	+00:10:00	Start STD.reset_regs
REL	PREV_DONE	Start COM.aec_wluv
REL	+00:05:00	Start CJS.scene.CDSsynoptic

REL	+00:40:00	Downlink		#  

REL	+00:10:00	Start STD.reset_regs
REL	PREV_DONE	Start COM.ts1_1st_movie

REL	+01:00:00	Downlink		# Sequnce keeps running

REL	+01:00:00	Downlink		# Sequnce keeps running

REL	+00:10:00	Start STD.reset_regs	# stop the movie
REL	PREV_DONE	Start DPM.ift_speed1024  
						# ** Should fill cron buffer
						# ** and make S/C send stop seq
REL	+01:00:00	Start STD.reset_regs
REL	PREV_DONE	Start DPM.ift_speed1024j   # ** should stop too
REL	+00:05:00	Downlink		#  

REL	+00:30:00	Start COM.ts1_1st_movie

REL	+00:10:00	Stop

REL	+00:01:00	Downlink		#  

REL	+00:15:00	Downlink		#