# FILE:
#       tv_trans3.tim
# PURPOSE:
#       TRACE Operations Simulation Plan File for
#	third temperature transition
# HISTORY:
#       3-Sept-1997 C. Kankelborg	& T. Tarbell
#
# COMMENTS:
#
#	No absolute date/time specified in this file since the
#	date/time of the start of the transition is not known
#	until 2-4 hours before it happens.
#
#	Run only sequences that won't confuse the quad shutter.
#
#	Run Time = Approx xx hours
#


REL     +00:00:00       Start STD.reset_regs PRIO=1
REL     PREV_DONE       Start DPM.ift_mosaic
REL     PREV_DONE       Start DPM.ift_wlscan
REL     PREV_DONE       Start DPM.ift_cmmodes
REL     PREV_DONE       Start DPM.ift_timavg
REL     PREV_DONE       Start DPM.sqt_extst

REL     +00:30:00       Downlink                

REL     +00:10:00       Start STD.reset_regs PRIO=1
REL     PREV_DONE       Start DPM.ift_speed1024
REL     +00:05:00       Start DPM.ift_speed1024j            
REL     +00:05:00       Stop

REL     +00:01:00       Downlink                

# --- Turn Lamp On, make occasional adjustments
REL     +00:10:00       Start STD.reset_regs PRIO=1
REL     PREV_DONE       Start COM.aec_wluv
REL     +00:10:00       Start CJS.scene.CDSsynoptic

REL     +00:20:00       Downlink                

REL	+00:10:00	Start STD.reset_regs PRIO=1
REL	PREV_DONE	Start COM.dc1_compress_dark
REL	PREV_DONE	Start COM.dc1_compress_wl
REL	PREV_DONE	Start COM.dc1_compress_uv
REL	PREV_DONE	Start RAS.testing.FE1_sanseuv

REL     +00:20:00 	Stop
REL     +00:00:01       Downlink                

REL	+00:10:00	Start STD.reset_regs PRIO=1

# --- Turn Lamp Off ?

# --- Logic Series Test
REL	+00:01:00	UTIM COM.sw4.logic.utim
REL     +00:01:00       Downlink

# --- GT & ISS Tests
REL     +00:10:00       Start STD.reset_regs PRIO=1
REL	+00:00:30	UTIM COM.gti0_diodes.utim

REL     +00:00:30       Start STD.reset_regs PRIO=1
REL	+00:00:30	UTIM COM.gti1_gt_cal.utim

REL     +00:00:30       Start STD.reset_regs PRIO=1
REL	+00:00:30	UTIM COM.gti2_jitter.utim

REL     +00:00:30       Start STD.reset_regs PRIO=1
REL	+00:00:30	UTIM COM.gti4_pzt_gain.utim
REL     +00:01:00      Downlink

#   Start sequence during downlink

REL     +00:00:20       Start STD.reset_regs PRIO=1
REL     PREV_DONE       Start COM.ts1_1st_movie

REL     +01:00:00       Downlink                # Sequence keeps running

REL     +00:20:00       Stop

REL     +00:01:00       Downlink