################################################################################
  SNAPSHOT TAKEN ON:      Tue Jan 29 07:00:04 2008      GMT: 12:00:04
  SNAPSHOT FORMAT FILE:   /tsw/egse_v5.2/screen_lib/dpu_sequence.scr
  ORIGINAL SNAPSHOT FILE: /td47/log/snaps/20080129_1200_dpu_sequence
  ROWS: 30 COLUMNS: 80
################################################################################

2008.01.29_12:00:02.70_GMT                                  CMD  8370  CLK F5C2x
HK4d/4e 36945 07379            TRACE DPU SEQUENCE           SC0a/0b 07398 36921 
                                                                                
      Control Computer                  Data Handling Computer                  
Non Valid Cmd:Error      0:0000   DHC Firmware      Ver:Pat          26:05      
Lev 9 State:Error       04:0000   DHC Instruction   Ver:Pat          01:2d      
CC Software Ver:Pat     01:35     DHC Warning Counter                   13      
CC Misc Control Bit   1F6F        DHC Status    48     State Mach       00      
AXIS Mask             0FFF        DHC Error   3800     Err Count       215      
Opto Coupler Rg Def   0700        Dmp Er_Stat 9A80                              
Pict St Mach stat       08        Dump: 1:8074  2:0162  3:34C3  4:0107  5:06AC  
Configuration Reg       61        Interrupt ID                        0008      
Serial Error   0 Flag 00          Registers: 21:0001 22:8E8E 23:0000 24:0000    
CC Mode                 00                                                      
                          Sequence Information                                  
                                              Registers:                        
Seq Pntr  0000   0:0004  1:0000  2:0000  3:0000  4:0000  5:0000  6:0000  7:0000 
Err Bits  00CB   8:0000  9:0000  A:0001  B:0000  C:0003  D:0000  E:11F7  F:0000 
Status    8000  10:0008 11:00F0 12:2242 13:217C 14:0000 15:0000 16:0000 17:0000 
Number       1  18:03E8 19:0200 1A:00AA 1B:0003 1C:0000 1D:0000 1E:0037 1F:4249 
Num in Seq   1  20:0000 21:0000 22:0000 23:0004 24:0001 25:0000 26:0268 27:0098 
Seq Addr  2305  28:0222 29:0010 2A:03F0 2B:0068 2C:0000 2D:0000 2E:0000 2F:0000 
                                                                                
CCD Amp       A(8)  SQID 000011F7    TRGT 0000008A     FRID 217c                
FRM        1063630  FRSQ       54    EXP      431                               
SEQ ERROR DUMP:     CNT      1503    CODE 00CB         OP   0002      ADDR 00c8 
                                                                                
SeqName:                                                     TDT.any_frames     
TrgName:                                                          top1.pos1     
DHC Error:                                  No_end_of_transfer_on_dma_bus_a