################################################################################
  SNAPSHOT TAKEN ON:      Fri Apr 11 15:00:07 2008      GMT: 19:00:07
  SNAPSHOT FORMAT FILE:   /tsw/egse_v5.2/screen_lib/dpu_sequence.scr
  ORIGINAL SNAPSHOT FILE: /td47/log/snaps/20080411_1900_dpu_sequence
  ROWS: 30 COLUMNS: 80
################################################################################

2008.04.11_19:00:02.53_GMT                                  CMD 15894  CLK 95B4x
HK4d/4e 97255 19453            TRACE DPU SEQUENCE           SC0a/0b 19470 97224 
                                                                                
      Control Computer                  Data Handling Computer                  
Non Valid Cmd:Error      0:0000   DHC Firmware      Ver:Pat          26:05      
Lev 9 State:Error       04:0000   DHC Instruction   Ver:Pat          01:2d      
CC Software Ver:Pat     01:35     DHC Warning Counter                   17      
CC Misc Control Bit   1F6F        DHC Status    48     State Mach       00      
AXIS Mask             0FFF        DHC Error   3800     Err Count        39      
Opto Coupler Rg Def   0700        Dmp Er_Stat 9A80                              
Pict St Mach stat       00        Dump: 1:8075  2:0162  3:34C3  4:0107  5:06AC  
Configuration Reg       61        Interrupt ID                        0008      
Serial Error   0 Flag 00          Registers: 21:0002 22:BAAE 23:0000 24:0000    
CC Mode                 00                                                      
                          Sequence Information                                  
                                              Registers:                        
Seq Pntr  0000   0:0005  1:0000  2:0000  3:0000  4:0000  5:0000  6:0000  7:0000 
Err Bits  00CB   8:0000  9:0000  A:0001  B:0001  C:0001  D:0001  E:11F7  F:0000 
Status    0000  10:0008 11:00F0 12:2242 13:217C 14:0000 15:0000 16:0000 17:0000 
Number       0  18:03E8 19:0281 1A:00AA 1B:0003 1C:0000 1D:0000 1E:0020 1F:0249 
Num in Seq   0  20:0000 21:0000 22:0000 23:0004 24:0001 25:0000 26:0050 27:0310 
Seq Addr  22FF  28:00F0 29:0000 2A:03E0 2B:0062 2C:0000 2D:0000 2E:0000 2F:0000 
                                                                                
CCD Amp       A(8)  SQID 000011F7    TRGT 0000008A     FRID 2242                
FRM        1198531  FRSQ      682    EXP     1218                               
SEQ ERROR DUMP:     CNT      1733    CODE 00CB         OP   00FF      ADDR 0070 
                                                                                
SeqName:                                                     TDT.any_frames     
TrgName:                                                          top1.pos1     
DHC Error:                                  No_end_of_transfer_on_dma_bus_b