################################################################################
  SNAPSHOT TAKEN ON:      Sun May 18 04:23:07 2008      GMT: 08:23:07
  SNAPSHOT FORMAT FILE:   /tsw/egse_v5.2/screen_lib/dpu_sequence.scr
  ORIGINAL SNAPSHOT FILE: /td47/log/snaps/20080518_0823_dpu_sequence
  ROWS: 30 COLUMNS: 80
################################################################################

2008.05.18_08:23:03.11_GMT                                  CMD 20924  CLK C7E9x
HK4d/4e 14019 02798            TRACE DPU SEQUENCE           SC0a/0b 02805 14014 
                                                                                
      Control Computer                  Data Handling Computer                  
Non Valid Cmd:Error      0:0000   DHC Firmware      Ver:Pat          26:05      
Lev 9 State:Error       04:0000   DHC Instruction   Ver:Pat          01:2d      
CC Software Ver:Pat     01:35     DHC Warning Counter                   18      
CC Misc Control Bit   1F6F        DHC Status    48     State Mach       00      
AXIS Mask             0FFF        DHC Error   3800     Err Count        94      
Opto Coupler Rg Def   0700        Dmp Er_Stat 9A80                              
Pict St Mach stat       08        Dump: 1:8074  2:0162  3:34C3  4:0107  5:06AC  
Configuration Reg       61        Interrupt ID                        0008      
Serial Error   0 Flag 00          Registers: 21:0001 22:B036 23:0000 24:0000    
CC Mode                 00                                                      
                          Sequence Information                                  
                                              Registers:                        
Seq Pntr  0000   0:0004  1:0000  2:001E  3:0000  4:0001  5:0000  6:00AA  7:0010 
Err Bits  00CB   8:0000  9:0000  A:0001  B:0000  C:0001  D:0001  E:135D  F:0000 
Status    8000  10:0002 11:0258 12:0000 13:0004 14:0000 15:0900 16:0028 17:0000 
Number       1  18:03E8 19:0280 1A:001E 1B:0003 1C:0000 1D:0000 1E:0000 1F:0249 
Num in Seq   1  20:0000 21:0000 22:0000 23:0004 24:0001 25:0001 26:0020 27:0118 
Seq Addr  349E  28:0430 29:01E0 2A:0000 2B:006C 2C:0000 2D:0000 2E:0000 2F:0000 
                                                                                
CCD Amp       A(8)  SQID 0000135D    TRGT 0000008B     FRID 1c17                
FRM        1263292  FRSQ       32    EXP      128                               
SEQ ERROR DUMP:     CNT      1905    CODE 00CB         OP   0002      ADDR 00c8 
                                                                                
SeqName:                                                       STD.dynamics     
TrgName:                                                          top2.pos1     
DHC Error:                                  No_end_of_transfer_on_dma_bus_a