################################################################################
  SNAPSHOT TAKEN ON:      Mon May 19 12:16:04 2008      GMT: 16:16:04
  SNAPSHOT FORMAT FILE:   /tsw/egse_v5.2/screen_lib/dpu_sequence.scr
  ORIGINAL SNAPSHOT FILE: /td47/log/snaps/20080519_1616_dpu_sequence
  ROWS: 30 COLUMNS: 80
################################################################################

2008.05.19_16:16:03.93_GMT                                  CMD 21204  CLK 8842x
HK4d/4e 17768 03548            TRACE DPU SEQUENCE           SC0a/0b 03553 17761 
                                                                                
      Control Computer                  Data Handling Computer                  
Non Valid Cmd:Error      0:0000   DHC Firmware      Ver:Pat          26:05      
Lev 9 State:Error       04:0000   DHC Instruction   Ver:Pat          01:2d      
CC Software Ver:Pat     01:35     DHC Warning Counter                   18      
CC Misc Control Bit   1F6F        DHC Status    48     State Mach       00      
AXIS Mask             0FFF        DHC Error   3800     Err Count        94      
Opto Coupler Rg Def   0700        Dmp Er_Stat 9A80                              
Pict St Mach stat       00        Dump: 1:8074  2:0162  3:34C3  4:0107  5:06AC  
Configuration Reg       61        Interrupt ID                        0008      
Serial Error   0 Flag 00          Registers: 21:0002 22:D017 23:0000 24:0000    
CC Mode                 00                                                      
                          Sequence Information                                  
                                              Registers:                        
Seq Pntr  0000   0:0011  1:0000  2:0000  3:0000  4:0000  5:0000  6:0000  7:0000 
Err Bits  00CB   8:0000  9:0000  A:0001  B:0001  C:0003  D:0001  E:11F7  F:0000 
Status    0000  10:0008 11:00F0 12:2242 13:217C 14:0000 15:0000 16:0000 17:0000 
Number       0  18:03E8 19:0281 1A:00AA 1B:0003 1C:0000 1D:0000 1E:0073 1F:4249 
Num in Seq   0  20:0000 21:0000 22:0000 23:0004 24:0001 25:0000 26:02D0 27:03A8 
Seq Addr  22FF  28:0132 29:0020 2A:03F8 2B:005E 2C:0000 2D:0000 2E:0000 2F:0001 
                                                                                
CCD Amp       A(8)  SQID 000011F7    TRGT 0000008A     FRID 2242                
FRM        1266013  FRSQ      607    EXP     1218                               
SEQ ERROR DUMP:     CNT      1915    CODE 00CB         OP   00FF      ADDR 0070 
                                                                                
SeqName:                                                     TDT.any_frames     
TrgName:                                                          top1.pos1     
DHC Error:                                  No_end_of_transfer_on_dma_bus_a