################################################################################
  SNAPSHOT TAKEN ON:      Tue Dec  9 02:46:04 2008      GMT: 07:46:04
  SNAPSHOT FORMAT FILE:   /tsw/egse_v5.2/screen_lib/dpu_sequence.scr
  ORIGINAL SNAPSHOT FILE: /td47/log/snaps/20081209_0746_dpu_sequence
  ROWS: 30 COLUMNS: 80
################################################################################

2008.12.09_07:46:00.84_GMT                                  CMD 49518  CLK 02B9x
HK4d/4e 11699 02338            TRACE DPU SEQUENCE           SC0a/0b 02342 11692 
                                                                                
      Control Computer                  Data Handling Computer                  
Non Valid Cmd:Error      0:0000   DHC Firmware      Ver:Pat          26:05      
Lev 9 State:Error       04:0000   DHC Instruction   Ver:Pat          01:2d      
CC Software Ver:Pat     01:35     DHC Warning Counter                   26      
CC Misc Control Bit   1F6F        DHC Status    48     State Mach       00      
AXIS Mask             0FFF        DHC Error   3800     Err Count         2      
Opto Coupler Rg Def   0700        Dmp Er_Stat 9A80                              
Pict St Mach stat       00        Dump: 1:8075  2:0162  3:34C3  4:0107  5:06AC  
Configuration Reg       61        Interrupt ID                        0008      
Serial Error   0 Flag 00          Registers: 21:0002 22:3A5C 23:0000 24:0000    
CC Mode                 00                                                      
                          Sequence Information                                  
                                              Registers:                        
Seq Pntr  0000   0:0015  1:0000  2:001E  3:FFFF  4:0000  5:0000  6:00AA  7:00B0 
Err Bits  00CB   8:0000  9:0000  A:0001  B:0001  C:0003  D:0001  E:135D  F:0000 
Status    8000  10:0001 11:0190 12:0015 13:0000 14:0000 15:0200 16:0028 17:0000 
Number       1  18:03E8 19:0281 1A:0014 1B:0003 1C:0001 1D:0000 1E:0000 1F:1249 
Num in Seq   1  20:0000 21:0000 22:0000 23:0004 24:0001 25:0000 26:03B8 27:02A8 
Seq Addr  2F49  28:0166 29:0020 2A:03E0 2B:0086 2C:0000 2D:0000 2E:0000 2F:0000 
                                                                                
CCD Amp       A(8)  SQID 0000135D    TRGT 0000008A     FRID 21ec                
FRM        1538111  FRSQ      337    EXP    19484                               
SEQ ERROR DUMP:     CNT      2762    CODE 00CB         OP   00EB      ADDR 00c8 
                                                                                
SeqName:                                                       STD.dynamics     
TrgName:                                                          top1.pos1     
DHC Error:                                  No_end_of_transfer_on_dma_bus_b