################################################################################
  SNAPSHOT TAKEN ON:      Sun Mar  8 21:23:05 2009      GMT: 01:23:05
  SNAPSHOT FORMAT FILE:   /tsw/egse_v5.2/screen_lib/dpu_sequence.scr
  ORIGINAL SNAPSHOT FILE: /td47/log/snaps/20090308_2350_dpu_sequence
  ROWS: 30 COLUMNS: 80
################################################################################

2009.03.09_01:23:03.20_GMT                                  CMD 60821  CLK 4FF8x
HK4d/4e 07248 01450            TRACE DPU SEQUENCE           SC0a/0b 01453 07257 
                                                                                
      Control Computer                  Data Handling Computer                  
Non Valid Cmd:Error      0:0000   DHC Firmware      Ver:Pat          26:05      
Lev 9 State:Error       04:0000   DHC Instruction   Ver:Pat          01:2d      
CC Software Ver:Pat     01:35     DHC Warning Counter                   2d      
CC Misc Control Bit   1F6F        DHC Status    48     State Mach       00      
AXIS Mask             0FFF        DHC Error   3800     Err Count        82      
Opto Coupler Rg Def   0700        Dmp Er_Stat 9A80                              
Pict St Mach stat       00        Dump: 1:8074  2:0162  3:34C3  4:0107  5:06AC  
Configuration Reg       61        Interrupt ID                        0008      
Serial Error   0 Flag 00          Registers: 21:0002 22:85CC 23:0000 24:0000    
CC Mode                 00                                                      
                          Sequence Information                                  
                                              Registers:                        
Seq Pntr  0000   0:0011  1:0000  2:001E  3:FFFF  4:0001  5:0000  6:00AA  7:0018 
Err Bits  00CB   8:0000  9:0000  A:0001  B:0001  C:0003  D:0001  E:135D  F:0000 
Status    8000  10:0001 11:0258 12:0011 13:0000 14:0000 15:0F00 16:0028 17:0000 
Number       1  18:03E8 19:0281 1A:001E 1B:0003 1C:0001 1D:0000 1E:001E 1F:4249 
Num in Seq   1  20:0000 21:0000 22:0000 23:0004 24:0001 25:0000 26:00C0 27:01F8 
Seq Addr  2F49  28:01A2 29:0000 2A:03E0 2B:0060 2C:0000 2D:0000 2E:0000 2F:0000 
                                                                                
CCD Amp       A(8)  SQID 0000135D    TRGT 0000008A     FRID 12bf                
FRM        1741221  FRSQ       48    EXP    11585                               
SEQ ERROR DUMP:     CNT      2983    CODE 00CB         OP   0071      ADDR 00c8 
                                                                                
SeqName:                                                       STD.dynamics     
TrgName:                                                          top1.pos1     
DHC Error:                                  No_end_of_transfer_on_dma_bus_a